- In-line saddle stitching
- Stacking for near-line finishing
- Lightweight compatible
- Easy application changes
The Sheeter 568 system for in-line saddle stitch features the Unwinder u9, Cutter c20, Stacker s20, Feeder 568 and conveyor, and generates individual sheets for in-line stitching or neat paper stacks for book blocks.
The center-shaft driven Unwinder u9 feeds a roll of paper up to 20.5” wide and 52” in diameter into the printer for continuous printing. Once the paper is printed, the Cutter c20 uses a rotary knife to cut printed output to the desired length.
For stitched booklets, individual sheets are then bypassed through the Stacker s20 and the Feeder 568 delivers them in sequence to the saddle stitcher. There, each sheet is individually scored, folded and collated into a set, then stitched and trimmed to create a finished booklet, with or without a printed cover.
For near-line or off-line finishing, the Stacker s20 builds 8.5” stacks, 1-up, 2-up or 3-up, to be easily transported to near-line finishing units, such as perfect binders.
For lightweight paper applications, add the optional Buffer 530 to the Sheeter 568 system. Positioned between the printer and the Cutter 561, the Buffer 530 accumulates the lightweight paper web and weaves it through rollers that rise and fall, filling the buffer and allowing job delivery without stopping the printer.
The Merger 535 option allows a 2-up printed web to be slit and merged into a single, collated paper stream. Positioned between the printer and the Cutter 561*, the web enters the Merger 535 and is slit in the center. A sensor continuously monitors the web for side-to-side variations or movement and the slitter automatically adjusts to cut precisely at the center of the web. The resulting two webs are then merged right-over-left or left-over-right, depending on the requirements of the application.
*Pinless slit merge applications require the Cutter 562.
Same features as the Cutter 561, plus the ability to process pinless slit merge applications.